Prepare the surface : Just like when painting the rest of the house, you need to prepare the bathroom walls for painting. You should inspect the walls and get rid of any damp areas that might be present. Due to the moisture, it’s common for the bathroom to have mold. Before you apply paint, ask a professional o get rid of it.
Choose the right color : The color you choose has a significant impact on the look you create in the bathroom. For a uniform look, go with the same colors that you have used on the other parts of the house. Professional painters recommend that you use soft, cool colors but if you are living in the cold areas of the country, avoid them as they tend to make the room appear colder than it is.
The color you choose shouldn’t be determined by the look you want to create—it also should be determined by the size of the bathroom. If you have a large bathroom, you are open to go with any shade of color—whether dark or light. On the other hand, if the bathroom is small, go for a lighter shade that will give the bathroom an appearance of space.
Painting experts also advise that you paint the wall that are opposite each other with the same color of different shades, this has been shown to make the bathroom look bigger than it is.
Think about the children : If you have kids, you know that they don’t like bathing. To make the bathroom interesting for them, interior house painters recommend that you paint it in exciting colors that make it an enjoyable place to be in. You can use artwork such as drawings of cartoon characters and animals. When doing it, avoid going overboard as you can easily make the bathroom scary.
Conclusion : These tips will give you the assistance you need to complete your bathroom project if you have the required skills. If you don`t feel confident to carry out the work then call a reputable painting contractor.
With the Saskatchewan winter just around the corner we thought we would go a little off topic to help you prepare!
Your winter-ready checklist
The trick to preparing your home for winter is to start early before any snow is on the ground. (So that would be in the next few weeks) You can easily tackle most of the items on this list yourself, although it is a good idea to schedule a professional inspection of your heating systems.
Clean your gutters and downspouts. Cover them with mesh guards to keep debris from building up over the winter.
Seal any gaps or cracks around all your windows and doors. This is easily the most cost-effective way to minimize your heating bill.
Replace all screen doors with storm doors. Do the same with your windows.
Inspect your roof for damaged shingles, corroded flashing or leaky vents. Make sure to do this before the snow falls.
Drain and winterize outdoor faucets and irrigation systems. Close any shut-off valves for outdoor faucets or secure it with a Styrofoam faucet cover. Remove any attached hoses and store them away for winter.
Prep your outdoor space for winter. Trim overgrown branches, bring outdoor furniture inside, aerate and fertilize the lawn, ensure rain drains are sloping away from your home and not damaging your foundation.
Clean or replace your furnace filter. Clogged filters make it harder to regulate the temperature in your home. You can clean your filter once before you should replace it.
Get your heating system professionally inspected. Book in early fall before the technicians get too booked up.
If you have a fireplace, get your chimney professionally cleaned. Even if you don’t use your fireplace very often, it is a fire risk and debris can build up inside the chimney.
If you have a gas-fired heater, have a professional perform a routine service check. An improperly maintained heater can spew poisons into the air of your home, so check your heater regularly.
Winter is notoriously hard on our homes, but by preparing your house before the cold weather sets in, you can prevent unexpected surprises and save money during those freezing, dark months.
Types of Primers
Primers are available in oil, shellac, or latex-based formulas. Each type has differing properties and uses a different solvent for thinning and cleanup. Choosing which type to use is largely a matter of matching the primer’s characteristics to the project at hand.
When to Prime
Every unfinished surface—including wood, drywall, metal, and concrete—should be primed before painting. While it can be tempting to skip this step, the results are almost always disappointing. Paint applied to unprimed surfaces tends to peel, crack, and chalk more than paint applied to properly primed surfaces.
Previously painted surfaces may not require priming unless you’re switching between oil-based or latex paint, or the existing paint is failing. Always scrape and sand any deteriorating surfaces before applying primer. Remember, your paint job is no better than the preparation that goes into it.
Good to use for:
Shellac primers should be used to prime or spot prime:
Latex primers are not as brittle as their oil or shellac-based cousins and provide a more flexible finish that is resistant to cracking. This makes them suitable for priming bare softwoods, though test them first to see if they raise the grain or allow resin to bleed through.
Latex primers are the best choice for unfinished drywall, since they act to even out the texture and sheen between the wallboard and joint compound. They also allow water vapor to pass through, which can make them less likely to peel.
Use latex primers on:
Oil/Latex Paint Test
If you’re not sure whether the existing paint is oil-based or latex, wipe a small area with a clean rag saturated with denatured alcohol, paint de-glosser, or non-acetone fingernail polish remover. If the paint is oil-based, it won’t be affected. If it’s latex, some paint will come off on the rag or the surface will become tacky.
Pay attention to the sheen
Sheen is the finish of the paint, and it has a significant impact on the look of your walls. Interior professional painters report that there are plenty of wall finishes that you can go with including gloss, semi-gloss, eggshell, flat and satin.
If you have a regular painting company that you use they will be able to advise as to the best option for your particular circumstances. When choosing the right sheen, you should note that high-traffic areas do well with a satin or gloss finishes. This is because the finishes hold the touching better and are easy to clean. The unfortunate thing is that they ruminate the wall imperfections giving your walls a bad look.
To hide any wall problems, you might be having in your house, apply a more matte-like finish such as the flat. While it won’t clean properly, it will hide any imperfections thus giving a much more pleasing finish.
Go with bold colors
Unlike on the outside of the house where bold colors would look awkward, there is no harm in going with bold colors when it comes to the interior of the house. When making your selection, go with colors that add depth and texture to your room. If you are confused about the right color to go with, get the input of professional painters. Be wary of going too dark with your colours though as it gives an appearance of a smaller space, a lighter blend will make the area seem much more open & roomy.
Always apply a primer
For an even coat, you have to apply a primer on your walls. The primer is more important if you are changing the wall color. The primer covers up the colors and stains thus you have a beautiful finish. It also adds an extra layer that allows the top coat to adhere better which further contributes to a nice finish. Be sure to use the correct type of primer for the substrate you are applying it to, if you are unsure which to use then a professional painter should have the knowledge to advise you accordingly.
Work with professional painters
While you can paint your house and achieve success, you are advised against it as you have high chances of damaging your walls and even damaging your paint. For peace of mind and increase your chances of giving your walls a perfect finish, work with reputable house painting contractors to help you with the painting. The painting contractors have the necessary skills. They also have the necessary painting tools such as rollers and high-quality brushes that aid in giving you perfect results.